Issue Date: 23 May 2011
Version 1.1
Escort iMiniPlus PDF Logger
Quick
User Guide v1.1
Escort Verification Technologies, Inc.
dba
ESCORT Data Loggers
PO Box 309, 120 Parkway Drive
Buchanan, VA 24066
Ph: 540-254-1433 Fax: 540-254-2433
- 13 -
Email:
techsupport@escortdataloggers.com
•
If you uncheck “Show summary in PDF file” the logger will not generate the
section of the report that summarizes alarm violations of the logging trip
•
If you uncheck “Show Graph in PDF” the logger will not generate the graph
•
If you uncheck “Show list of readings in PDF file”, the logger will not generate
the list of readings report
You can configure the logger to display date in month / day / year or day /
month / year format by choosing one option from drop down box on this tab as
shown below:
10.2 Programming password
The iMiniPlus PDF Logger supports a password
option that, when enabled, results in users
being required to provide the correct
password to gain further access to the
iMiniPlus PDF Logger. When the password
option is enabled, a window similar to the
following picture will be displayed allowing the
user to enter the correct password.
The Program and Configure process will only
continue successfully if the correct password
is supplied by the user. Passwords are digits
only, up to 4 characters.
You can enter a password to safeguard your logger from unauthorized
tampering. Make sure that you keep a note of your password and logger serial
number in a safe place. If you lose or forget the password, the logger will have
to be returned to your nearest distributor or Escort Data Logging Systems to
restore default password.
Change Password – if you have password protected the iMiniPlus PDF Logger
or want to add a password for the first time you can do this here.
Protect program settings - Tick this option
if you want to protect your programming
settings for the current logger.
Protect retrieval of readings- Tick this
option to disallow viewing of data from the
current logger without a password.
After complete the password section, click
OK
Select the Next button or Sensors tab.
