Overview
Hardware Manual • Doc. No.: V.1915.23/ Rev. 1.0
VME-PMC-CADDY/2plus
Page 12 of 47
Weight
VME-PMC-CADDY/2plus : ca. 400 g
VME-PMC-CADDY/2-CC (order no.: V.1915.04): 650 g
Power supply voltage
(without PMC
modules) of
VME-PMC-CADDY/2plus, VME-PMC-CADDY/2plus-T:
VMEbus P1, P2:
5 V ± 5% / typical 2 A current consumption
3.3 V not in use (see chapter. 1.4.4)
+12V ±5%
(only to PMC slots)
-12V ±5%
(only to PMC slots)
VME-PMC-CADDY/2-CC:
VMEbus P1, P2:
5 V ± 5% / typical 2 A current consumption
3.3 V ± 5% / ca.400mA
Table 1: General technical data
1.4.2 Serial Interfaces
Number
2
Control
UART im MPC8349
Signals
to X1940:
VME-PMC-CADDY/2plus and
VME-PMC-CADDY/2plus-T only:
RxD, TxD, RTS, CTS (for each port)
to VMEbus P0:
RxD, TxD (for each port)
Bit rate
300 bit/s ... 115.200 bit/s
Physical interface
RS-232
Connector
VME-PMC-CADDY/2plus and VME-PMC-CADDY/2plus-T only:
X1940 (10-pin har-link) and VMEbus P0,
Adapter cable 10-pol har-link to 9-pin DSUB available
Table 2: Serial interfaces
