Overview
VME-PMC-CADDY/2plus
Hardware-Manual • Doc.-No.: V.1915.23 / Rev. 1.0
Page 15 of 47
Power supply
voltage
In the standard placement of the VME-PMC-CADDY/2plus and the
VME-PMC-CADDY/2plus-T the 3.3 V power supply voltage for
board and PMC card is generated onboard.
3.3 V:
max. 1.5 A current consumption per PMC slot
3.3 V AUX:
for both PMC slots together
max. 250 mA current consumption
5 V:
max. 1.0 A current consumption per PMC slot
+12V:
max. 1.0 A current consumption per PMC slot
-12V:
max. 1.0 A current consumption per PMC slot
In the standard placement of the VME-PMC-CADDY/2-CC the
power supply voltages are supplied via the VMEbus.
Note:
The maximum permissible sum of the power
consumption of a PMC module corresponds to the
value of 15 W for double-sided modules defined in the
IEEE Std. 1386-2001.
Table 4: PMC slots
1.4.5 Software
Board support packages are available for VxWorks and Linux.
BSPs for other operating systems are available on request
