All rights reserved. Reproduction as well as electronic duplication of this guide, complete or in part, requires the written consent of ESERA-
Automation or E-Service GmbH. Errors and technical modification subject to change.
©
ESERA-Automation, E-Service GmbH 2019
www.esera.de
Programming Manual Controller-Gateway-Station V1.0 R1.1
Page 56 of 77
c.
Function of inputs
Displays 1-5 show the status of the digital outputs.
By pressing displays 1-5, the corresponding digital outputs can be switched directly.
After switching the output, the new status is output as confirmation.
d.
Function of analog output 0-10VDC
You can use the slid-control function to set an analog output value. The value is set by pressing the "SET" button.
The current analog value is output in the "CURRENT VALUE" field.