* if the sensor or actuator supports Auto-E-Connect. For details, please refer to the operating instructions of the sensor or actuator.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change.
ESERA GmbH 2021
www.esera.de
11216 V5.0 R1.0 Manual
Page 1 of 9
Art. No. 11216
User Guide
8-fold Digital Input for 1-Wire Bus
8 inputs for 10-30V DC signals
e.g. for switches, reed contacts or other
digital sensors
LED displays for input status,
and supply voltage
Inputs can be activated by manual operation
DIN rail housing for control cabinet installation
Connection via screw terminals
Simple software integration
1-Wire interface DS2408 commands
Housing color green (RAL 6020)
Note
Before you start assembling the device and put it into operation, read this operating manual through
to the end at your leisure, especially the section on safety instructions.
