background image

All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of 
ESERA GmbH. Errors and technical modification subject to change. 



ESERA GmbH, ESERA-Automation 2020 

www.esera.de 

11118 V1.0 R1.0  Manual 

Page 4 of 4 

 
 
 

 

13 

Trademarks 

All mentioned designations, logos, names and trademarks (including those which are not explicitly marked) are trademarks, 
registered trademarks or other copyright or trademarks or titles or legally protected designations of their respective owners 
and are hereby expressly recognized as such by us. The mention of these designations, logos, names and trademarks is 
made for identification purposes only and does not represent a claim of any kind on the part of ESERA GmbH on these 
designations, logos, names and trademarks. Moreover, from their appearance on ESERA GmbH webpages it cannot be 
concluded that designations, logos, names and trademarks are free of commercial property rights. 

ESERA and Auto-E-Connect are registered trademarks of ESERA GmbH. 

 

14 

Contact 

ESERA GmbH 
Adelindastrasse 20 
87600 Kaufbeuren 
GERMANY 
Tel.: +49 8341 999 80-0 
Fax: +49 8341 999 80-10 

www.esera.de

 

info@esera.de

 

WEEE-Number: DE30249510 

 

Summary of Contents for Auto-E-Connect 11118

Page 1: ...is connected to the 1 Wire network via screw terminals and to the temperature sensor via RJ12 modular jack It is not necessary to remove the existing connectors of the temperature sensor as the pin assignment of the temperature sensors is matched to the 1 Wire Adapter 1 As further system components for the 1 Wire network we recommend the use of a 1 Wire Hub II as power supply and 1 Wire Bus Couple...

Page 2: ... 7 Assignment Screw terminal 1 Wire network Screw terminals 5V 1 Wire Data and GND are provided for connection to the 1 Wire network The assignment is printed on the printed circuit board 8 Operating conditions The module may only be operated at the voltages and ambient conditions specified for it The device can be operated in any position The device is intended for use in dry and dust free rooms ...

Page 3: ...or operational and connection errors outside of our control we assume no liability of any kind for any resulting damage Kits should be returned without their housing when not functional with an exact error description and the accompanying instructions Without an error description it is not possible to repair For time consuming assembly or disassembly of cases charges will be invoiced During instal...

Page 4: ...ed designations of their respective owners and are hereby expressly recognized as such by us The mention of these designations logos names and trademarks is made for identification purposes only and does not represent a claim of any kind on the part of ESERA GmbH on these designations logos names and trademarks Moreover from their appearance on ESERA GmbH webpages it cannot be concluded that desig...

Reviews: