U46DJ
ESI
5.2. Input Section
(1) Input
This is where you can increase the input level of the analog input 1/2. The input level 3/4 is fixed at
0dB. The number on the bottom indicates the relative level in dB
(2) Input source display
This is where you can check current input source selected by the input source selector on the front
panel of U46DJ.
Input CH 1/2 Input CH 3/4
(3) Monitor
This is where you can adjust input monitoring level of U46DJ. Set the level using the mouse, mouse
wheel, or cursor keys. The number on the bottom indicates the relative level in dB. You can also
select mute button to mute each monitoring input source.
•
14