U46DJ
ESI
3. Hardware Installation
3.1. Minimum system requirements
Intel Pentium III 600MHz CPU or equivalent AMD CPU
256MB of RAM
Direct X 8.1 or higher
Microsoft Windows®XP
One available USB port
3.2. Installation
Before driver installation, please locate your original Windows CD, as you may need it during
installation. If you have a motherboard with a new chipset, please install the recent patches
provided by your motherboard or chipset manufacturers.
Find the USB port on your computer. A sample USB port is pictured below. It is typically located
next to the PS/2 or serial ports on the back of your computer.
Plug the U46DJ’s USB cable (Series A plug type) into the USB port of your computer.
Turn on the U46DJ’s power button. After that, you will see on power light on the U46DJ’s front
panel. The U46DJ gets the power from the computer via USB cable. You can also use an external
Power supply if you have one.
7