Informa
ti
on
Suffi
cient air is needed for proper combus
ti
on and exhaus
ti
on of gases
through the
fl
ue (chimney) of fuel burning equipment to prevent back
dra
fting.
Ductless fans must always be vented to the outdoors
.
When assessing the air pressure, the en
ti
re v
enti
la
ti
on system in the
house/apartment must be taken into account, e
.g.
hob and/or gas
cooker, this rule does not a
pply.
Government regula
ti
ons must be observed for the conveyance of
exhaust a
ir.
If the extractor hood is used in circula
ti
ng air mode with
ac
ti
vated carbon
filter
, there are no
opera
ting
restric
ti
ons
.
If you choose extrac
ti
on-air mode,
install check valve on the vent hole
.
Prepare the installa
ti
on:
Ensure the power has been turned o
ff
before beginning this installa
ti
o
n.
Plug must be assembled in places easy to drag and ins
ert.
To install this hood you will require
two assistants
.
You will need
following tools and material to
complete this installa
ti
o
n.
Tools you will need:
Drill appropriate to your wall
Phillips Screwdriver
Tape Measure
Hand Saw or Jig Saw
Installa
ti
on work and electrical wiring
must be done by qua
lifi
ed person(s) in
accordance with all applicable codes
and standards, including
fi
re rated
construc
ti
o
n.
Do not discharge the exhaust air into
a
flue
from other appliances burning
gas or other fuels
.
Regula
ti
ons
concerning the discharge of air have
Min. 650mm
Max. 750mm
597/
757/
897mm
EN-7
