17
Kongsberg C-series
17.7. Start the
TakeUp Unit
The
TakeUp Unit
is activated for processing when:
• The power button is switched on.
• The
Emergency Stop
button is pulled up (in de-activated position).
The
TakeUp Unit
is activated.
The machine starts processing.
It stops when the dancer roller is in neutral position, the power button is
switched off or when the emergency stop is activated.
Attention:
The
TakeUp Unit
does not stop automaticly when the waste roll is full.
This has to be done manually by switching off the power button or by
activating the emergency stop button.
17.8. Using the Autogrip Shaft
Put the core/media roll central on the autogrip
shaft, which uses rubber blocking cords to grip
with.
Rotate the core/media roll to engage it with
the autogrip-shaft.
Note:
If a core/media roll of the same size is
often used; install a roll clamp at one side of
the shaft, to enable easy replacement.
Autogrip shaft installation
185
