19
Kongsberg C-series
19. i-BF Board Stacker
19.1. Introduction
Welcome to the iBF Board Feeder and iBS Board Stacker User Guide
The C6 Feeder/Stacker is an automated material handling device designed to increase process
efficiency and productivity as well as reduce manual labor and scrap due to mishandling of
large media, and multiple board streams.
The automation is capable of both feeding and stacker flexible and rigid materials, and
eliminates the repetitive steps normally performed by a machine operator, freeing the
operator to perform other duties.
The Feeder/Stacker is fully integrated to the digital cutter thought Ethernet communications.
The Feeder
lifts and transfers media from a customer’s pallet on the floor onto its own
support table at the transfer point to the finisher.
The Stacker
picks up the entire cut board from the C6 conveyor and stacks the boards, cutouts
and scrap, onto the customer’s pallet.
19.2. Health and Safety
19.2.1. About this section
215
