12
Kongsberg C-series
2 Insert the two
Latch Pins
.
3 Insert the
Cotter Pins
.
How to replace a Knife Blade
This picture shows how the
Knife
Blade
is aligned using two
Guide
Pins
(a and b) beneath the blade
clamping.
1.
Loosen the two screws (b) of the
Knife Blade
clamping.
2.
Carefully remove the blade (a).
3.
Insert a new
Knife Blade
and
make sure that it is aligned with
the
Guide Pins
(c).
4.
Mount the new tool. (Note the
position of the
Guide Pin
).
5.
Ensure that the tool height is
calibrated on the
Measuring
Station
.
About Tool Adjustment
• For the
V-notch Knife
, we recommend the manual procedures for
Tool Rotation
and
Center Offset
adjustment.
• When adjusting
Tool Rotation
and
Center Offset
, use a thin
Folding Carton
material.
• Remember that you should look at the bottom side of the material for correct alignment.
• The adjustment depends upon the actual material due to weight, structure and thickness.
82
