12
Kongsberg XN / iPC 2.0
72
Ensure the path is clean.
Fix cover properly.
Push / pull the perforation wheel in / out from
the adapter.
Tool Adjustment
For this tool, complete the following adjustments:
Adjustment
Description
Tool Height
Measured automatically, possible to add an
Offset Value
.
Lag Setting
The
Lag
value depends upon the
Blade Adapter
.
Nominal value is 0 mm.
Tool Rotation
Adjust
Tool Angle
tangential to
Moving Direction
.
Center Offset
Adjust
Tool
sideways until centered.
Tool Offset
Adjust offset relative to
Laser Pointer
.