22
Setting mode
Changing settings
1
Press and hold the SPEED button.
2
Press the SPEED button repeatedly to select the
item to change.
CLK>
c
DISP>
c
DPaOFF>
c
APS>
c
DIMMER>
c
F/W ver.
3
Press the rotation speed adjustment (−/+) but-
tons to change the setting value.
4
Press the play/stop (
t
/
8
) button to end mak-
ing settings.
Setting mode will also end and the ordinary display will reappear
if nothing is done for ten or more seconds.
o
Settings are retained even if the power plug is disconnected.
Clock setting
CLK>***
Use this to set synchronization with an external clock.
o
By default, the setting is OFF.
OFF
Clock synchronization is not used.
IN
In this mode, this unit is synchronized with the 10MHz clock signal
input through its 10MHz IN clock connector from a clock generator.
The CLOCK indicator lights. The CLOCK indicator blinks when in
the process of synchronizing or unable to synchronize.
o
The clock frequency that can be input is 10 MHz.
o
When a record is playing, do not stop the clock signal by turn-
ing off the clock generator power or disconnecting the BNC
coaxial cable that is supplying the 10MHz clock signal.
NOTE
When set to CLK>IN and synchronized with 10MHz clock, “CLK 10M”
will be shown on the display.
Display setting
DISP>***
Use this to change the display appearance.
o
By default, the setting is NORM.
NORM
This shows when playing/stopped and the RPM.
RPM
This shows only the RPM.
AUTO
This shows when playing/stopped and the RPM. When rotation is
stable, the display will become unlit.
Settings
Summary of Contents for Grandioso T1
