N-03T
Firmware update manual
2
Update procedures
A micro USB cable is necessary to update the firmware.
Use a commercially-available micro USB cable.
IMPORTANT NOTICE
Different firmware update programs are made for every
model. Execution of a firmware update program for a different
model will make this unit unusable.
NOTE
The screens used in these instructions are from Windows 7.
Installing the driver for the update
After installing this on the computer once, installing it again will not
be necessary.
1
Download Win_DFU_driver.exe.
Save it anywhere on the computer.
2
Double-click Win_DFU_driver.exe.
3
When “Press any key to continue...” appears,
press the Enter key.
Display example
* DFU driver for “Windows7 32bit” will be installed.
Press any key to continue...
NOTE
If a “User Account Control” pop-up message appears during
installation, click “Yes”.
4
When the Device Driver Installation Wizard
appears, click “Next”.
5
Click “Finish”.
Updating the firmware
o
Do this after installing the driver for the update.
1
Turn the unit off and disconnect all cables
other than the power cord.
2
Press the POWER button while pressing the +
button to turn the unit on.
The firmware version will be shown.
Display example
I / F V 1 . 0 0
