background image

 

                                                    

3

 

Safety Considerations

 

1.Safety marks contained in these instructions 
 

1. If the safety precautions marked by this symbol are not complied with, injuries to persons may 

be caused. 

              2. If the safety precautions marked by this symbol are not complied with, damage to the machine 

or to its functions may be caused. 

 

2.Please read the label on the machine carefully 

 

When abnormal conditions happen, like abnormal noise, smell, smoke, temperature rise, leakage or fire, 

please cut off power immediately. And contact our customer service department or distributor. Don’t repair 
it by yourself. Please contact fire and rescue department if necessary. 

 

3.For your safety, please read carefully the cautions before installation or use 

 
• Strictly follow the instructions and safety attentions before installation and usage. 

• All the electric works and piping should be done by qualified professionals. 

• Keep the electrical parts away from water to maintain good electric insulation. 

• Complete the grounding engineering according to the Electrical Safety Regulations to avoid leakage. 
• The machine needs to be used with special power supply. Don’t share the circuit with other equipment. 

• The machine should be fastened at the place of flatness and good ventilation and keep proper distance 

with surrounding. 

• Keep the machine away from fire and pollutant. 

• It is not recommended to place the machine under the sun and rain. 

• Keep the children away from the machine. 
• Random change of specification by user is not allowed. 

• It is prohibited to use the volatile solvent, volatile oil, toluene and other chemicals besides or above the 

machine. 

• Make sure the machine doesn’t put on the cable, and the cable is completely fine, in case of any danger 

of leakage and fire. 

• Don’t operate or repair the machine with wet hands. 

• Under no conditions should users repair the machine by themselves. Only the professionals are au-

thorized to repair the machine, it may result in personal injury or more serious problem to the equip-

ment. 

• Don’t wash the machine directly with water or cleanser. Need to scrub by cloth with water or mild de-

tergent. 

• For avoiding machine breakdown or any danger, it is prohibited to insert objects into the air outlet. 

• Users could not modify or repair the power wire. 

• It is prohibited to put anything on the machine, in case it falls down during the operation of the machine 

and cause danger.

 

Summary of Contents for ECOCENT AIR MVHR-300V















Reviews: