Checking V-belt
To ensure optimum power transmission from the engine to the eccentric shaft, the V-belt must be in good
condition.
1.
Turn off the engine. Engine must be cool before checking the V-belt.
2.
Remove the belt guard to access the V-belt.
3.
Check the V-belt. If the V-belt is cracked, frayed, or glazed, it should be replaced as soon as
convenient.
Changing V-belt
4.
Remove the four bolts securing the belt guard.
5.
Release the spring from tension pulley hook to void the belt tension.
6.
Slip the old V-belt off of the wheel pulley and install the new V-belt in its place.
As the clearance between exciter pulley and engine deck is small, a spark plug sleeve is
helpful for installing the new V-belt.
7.
Position the V-belt over the engine pulley and tension pulley.
8.
Hook the released spring securing the tension pulley to its original position and check if the V-belt
tension is correct.
9.
Replace the belt guard.
When removing or installing the drive belt, be careful not to get your fingers caught between
the belt and pulley.
Summary of Contents for XTP9
