63
•
'Dry' for dry foods like cookies, rice and
coffee..
•
'Humid ' for cheeses, dry meats and salami.
•
'Humid ' for red meats, which have liquids
or blood, and fish. When the machine is
turned on, the sealing option is always set to
'Humid '
To set the sealing mode, before starting the
packing cycle, press the 'sealing mode' button
(2M) to select the mode desired (fig. A).
ATTENTION:
The sealing mode selected
remains memorized until the Handles (1) are
rotated to the OPEN position. The selection
must be done at every packing cycle.
3.2 Set the pump suction speed
The Espressions Vacu Pro 2 is equipped with
a pump suction speed regulator to make the
packing operation easier. When the machine
is activated by rotating the Handles (1) to the
START position, the speed is automatically set
to 'turbo' or the highest that can be used in
normal packing operations. However, when
packing fragile foods in Espressions MAGIC
VAC® bags, it is best to select the 'slow' function
which reduces the pump speed, thus allowing
control over the performance of the operation
by manual activating the sealing process with
the 'seal' button (2h) at the proper time. If the
'slow' speed is selected and the 'canister' or
'marinating' functions are then activated, the
speed will automatically set itself to 'turbo'.
How to use your Vacu Pro 2
WARNING:
When not using the machine, keep
the Handles (1) in the STORAGE position. Do not
close completely in order to avoid damaging the
Airtight Gasket (7).
Before each use, carefully clean your machine
and accessories that come in contact with
food (canisters, lids, jars, etc....) following the
instructions provided in paragraph 'CLEANING
INSTRUCTIONS'.
1. Positioning the machine
Position the machine in a dry place on a horizon-
tal surface, being careful to leave the work zone
around the machine itself free of obstacles and
wide enough to allow for placing the bags of
food to be packaged. Connect the power cable
to an electrical outlet corresponding with its
voltage (see the information label).
2. Connecting the machine
Insert the Power Cable Plug (17) in the outlet.
Check for correct connection by rotating the
Handles (1) in the START position; on the display
of the Mod. EP6400, the GREEN ON LED (2a),
the BLUE LED (20) for the 'turbo' pump speed
and the RED LED (2L) for the 'Humid ' sealing
mode will light up.
3. Adjustments
3.1 Setting the sealing mode
The Espressions Vacu Pro 2 is equipped with
an intelligent sealing function that auto-adjusts
the sealing according to the temperature of the
Sealing Bar which increases little by little with
consecutive packing cycles. Therefore, the final
bag sealing result can be influenced by the
type of food to be packed or the temperature
of the room. Thus, to optimise the final result
you can choose form 3 sealing modes:
fig.
A
Summary of Contents for EP6400
