Espressions EP6900, Instruction Manual

35

34

3.

  Place the hopper on the press chamber (1) so 

that the tabs fall into the recesses and turn 

the hopper clockwise on the press chamber (2).

4.

  Now place the complete upper part on the 

housing of the Smart Slow Juicer. If this 

does not slide on correct immediately, press 

lightly until both parts fit together well.

Before using for the first time, thoroughly rinse all parts of the appliance that come into contact 

with food.  For instructions see 'Cleaning, Maintenance & Storage.'

Features and components of 

the Smart Slow Juicer 

Using the Smart Slow Juicer

1

3

4

5

6

8

9

14

7

2

1

2

1.   Pusher

 Used, if necessary, to push the fruit through 

the pressing chamber towards the Smart Slow 

Juicer's pressing screw.

2.   Entry mouth

 For feeding fruit and protects against splashing, 

equipped with rotating hand guard. In the case 

of larger pieces of fruit and vegetables, put 

them in and turn them over so that they fall 

into the feed mouth.

3.   Hopper

Connects the feed mouth to the press chamber.

4.   Press screw

 The most important element of the Smart Slow 

Juicer. The press screw grinds ingredients and 

ensures the extraction of juice.

5.   Plastic filter

 The plastic filter separates the juice from the 

pulp and is easy to clean.

6.   Press chamber

 Here, fruit and vegetables are pressed and the 

juice separated from the pulp. Juice and pulp 

run from here to the right outlet.

7.   Pulp outlet

For the export of pulp.

8.   Juice outlet

For the export of the juice.

9.   Housing / motor part

 The Smart Slow Juicer's housing houses the 

motor and other technical and electronic 

components of the device.

10.  Play button 

 Used to start and stop the Smart Slow Juicer. 

11.  Reverse button 

 Used to change the direction of rotation         

of the press screw and to remove blockages  

in the pressing chamber

12.  Cleaning brush

 To clean the removable parts and spouts.

13.  Juice container

 For juice, place under the juice spout.

14.  Pulp container

 For pulp, place under the pulp spout.

Installing the Smart Slow Juicer

Assemble the machine according to the 

instructions below and only use the machine  

in this assembled state for pressing.

1.

  Place the plastic filter firmly in the pressing 

chamber.

2.

    Place the press screw in the centre of the 

chamber and press lightly. If the press screw 

is not tightened properly, the hopper will 

not fit properly onto the chamber.

10

11

12

13