ESPRESSO
STEAM
ON/OFF
READY
POWER
FILTERS
• 1 X SINGLE
SHOT BASKET
• 1 X DOUBLE
SHOT BASKET
STEP 1
Place your espresso machine on a flat,
dry surface.
STEP 4
Open the water tank located on the
back of the machine. Open the lid and
lift out the tank using the provided
built-in handle.
STEP 7
Press the “ON/OFF” button. The
POWER
light will illuminate in orange
colour to confirm the machine is
powered up. Once the machine is
warmed up and ready for use, the
READY
light will illuminate in green.
STEP 3
Remove the filter holder if locked into the
brew head.
STEP 6
Make sure the centre control dial is set
to “
•
”, plug the machine into a 230V
power outlet.
STEP 9
AUTO-OFF FUNCTION
The machine will turn itself off
automatically after 25 minutes of no
usage, 25 minutes of continuous usage,
or if the pump has been functioning
continuously for 3 minutes.
NOTE: Hold
down the “ON/OFF“ button for
4 seconds to power the machine off.
There is no need to remove the power
plug from the outlet after every use.
STEP 2
Make sure the centre control dial is set
to “
•
”. Do not plug your machine into a
power source until Step 6.
STEP 5
Fill the water tank with cold water to
the MAX level mark. Carefully slide
the tank back into position.
Once secure, close the tank lid.
230V PLUG-IN
ELECTRIC
COFFEE
GRINDER
1.25L LARGE
DETACHABLE
WATER TANK
WITH CLOSING LID
ESPRESSO
STEAM
ON / OFF
READY
POWER
ESPRESSO
STEAM
ON / OFF
READY
POWER
ESPRESSO
STEAM
READY
POWER
ESPRESSO
STEAM
ON/OFF
READY
POWER
ESPRESSO
STEAM
ESPRESSO
STEAM
READY
ESPRESSO
STEAM
ON / OFF
READY
POWER
ESPRE
SSO
STEAM
ON/OFF
READY
POW
ER
STEP 8
Place an empty cup or container under
the brew head.
Summary of Contents for All-in-one
Page 8: ...Espresso Works co uk ...
