background image

ET188

2

Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc.
Your new treadmill was manufactured by one of the leading fitness manufacturers in
the world and is backed by one of the most comprehensive warranties available.
Through your dealer, Spirit will do all we can to make your ownership experience as
pleasant as possible for many years to come. The local dealership where you
purchased this treadmill is your administrator for all Spirit warranty and service needs.
Their responsibility is to provide you with the technical knowledge and service
personnel to make your experience more informed and any difficulties easier to
remedy.

Please take a moment at this time to record the name of the dealer, their telephone
number, and the date of purchase below to make any future, needed contact easy. We
appreciate your support and we will always remember that you are the reason that we
are in business. Please complete and mail your registration card today and enjoy your
new treadmill.

Yours in Health,
Spirit Manufacturing, Inc.

Name of Dealer______________________________________
Telephone Number of Dealer___________________________
Purchase  Date_______________________________________

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number

_______________________________________

REGISTER YOUR PURCHASE

The self-addressed product registration card must be completed in full and returned to
Spirit Manufacturing, Inc. or register online at: www.spiritfitness.com/warranty.asp

ET188_ver.A

CONGRATULATIONS ON YOUR

NEW TREADMILL AND WELCOME

TO THE SPIRIT FAMILY!

Product Registration

Summary of Contents for ET188


















Reviews: