Esprit Statmux User Manual
December 1997 Issue 1.3 Page 8 of 36
2.6
General Set-Up Display Layout
There are three main areas on the supervisor set-up screen used to change parameters
for the Esprit:
Upper left -
System parameters (Mode,
Link Clock, Carrier, Residual,
and Configure).
Upper right -
Other display pages which
may be selected (Channels 1
to 16, Modem Setup.
Bottom -
Channel configuration.
The initial display is that for the ASYNC channels.
2.7
General Keyboard Conventions
Only a few keys are required to configure the Esprit multiplexer and are summarised
as follows:
(Right arrow)
Moves the cursor to the next field to the right.
(Left arrow)
Moves the cursor to the next field to the left.
(Up arrow)
Moves the cursor to the next field upwards.
(Down arrow)
Moves the cursor to the next field downwards.
+ (Plus) or <SPACEBAR>
Toggles the parameter value up to the next available setting.
- (Minus)
Toggles the parameter value down to the next available setting.
<ENTER> or <RETURN>
Accepts the current display page (else same as
).
<CTRL> and U
Accepts all changes and causes multiplexer re-configuration.
<ESC>
Abandons all changes since last <CTRL> and U.
Summary of Contents for Statmux
Page 1: ......
