background image

BP2 OPERATOR’S MANUAL 

 

ESS WARRANTY:_____________________________________________________________________                              

Electrostatic  Spraying  Systems,  Inc.  warrants  to  the  original  purchaser  of  any  Electrostatic  Spraying  Systems        
equipment shall be free from defects in material and workmanship for a period of one year after date of delivery.  
The ESS warranty form must be filled out online for verification of purchase. To register please visit: 

http://maxcharge.com/registration/ 

 

Disclaimer of Implied Warranties and Consequential Damages 

Electrostatic Spraying Systems’ obligation under this warranty, to the extent allowed by law, is in lieu of all warranties, 

implied or expressed, including implied  warranties of merchantability  and fitness for a particular purpose  and any 
liability  for  incidental  and  consequential  damages  with  respect  to  the  sale  or  use  of  the  items  warranted.    Such      
incidental and consequential damages shall include, but not limited to: transportation , charges other than normal 
freight  charges  cost  of  installation  other  than  cost  approved  by  Electrostatic  Spraying  Systems,  Inc.,  duty  taxes,  
charges for normal service or adjustments, loss of crops or any other loss of income, expenses due to loss, damage, 
detention  or  delay  in  the  delivery  of  equipment  or  parts  resulting  from  acts  beyond  the  control  of  Electrostatic 
Spraying Systems, Inc. 

 

THIS WARRANTY SHALL NOT APPLY: 

1.  To vendor items which carry their own warranties such as, but not limited to, engines, air compressors, and liquid 

pumps.    Electrostatic  Spraying  Systems,  Inc.  shall  supply  replacement  parts  at  list  price  pending  the  warranty  
investigation of the vendor item.  Vendor items parts such as air compressors, liquid pumps, solenoids, and other 
such items must be returned before warranty credit. 

2.  If the unit has been subject to misapplication, abuse, misuse, negligence, fire or other accident. 

3.  If parts not made or supplied by Electrostatic Spraying Systems, Inc. have been used in connection of the unit, if, 

in  the  sole  judgement  of  Electrostatic  Spraying  Systems,  Inc.  such  parts  affect  its  performance,  stability  or       
reliability. 

4.  If  the  unit  has  been  altered  or  repaired  in  a  manner  which,  in  the  sole  judgement  of  Electrostatic  Spraying      

Systems, Inc. such alteration or repair affects its performance, stability or reliability.  This shall include but not be 
limited to opening of the spraygun shell by anyone not authorized by Electrostatic Spraying systems, Inc. to do 
so. 

5. 

To  normal  maintenance,  service  and  replacement  items  such  as,  but  not  limited  to,  engine  lubricant,    
filters, or to normal deterioration of such thing as, but not limited to, belts and exterior finish, due to use 
and exposure.

 

 

NO EMPLOYEE OR REPRESENTATIVE OF 

ELECTROSTATIC SPRAYING SYSTEMS, INC. 

IS AUTHORIZED TO CHANGE THIS WARRANTY 

IN ANY WAY OR GRANT ANY OTHER WARRANTY 

UNLESS SUCH CHANGE IS MADE IN WRITING 

AND IS SIGNED BY A CORPORATE OFFICER OF 

ELECTROSTATIC SPRAYING SYSTEMS, INC.  

20 

Summary of Contents for BP2


























Reviews: