BP2 OPERATOR’S MANUAL
IMPORTANT!
Read the Operator’s Manual!
Failure to do so is considered a misuse of the equipment.
It is the responsibility of the user to read the Operator’s Manual to understand the safe
and correct operating procedures for the sprayer and to maintain the sprayer according
to the manufacturer’s recommendations. It is the operator’s responsibility to ensure that
all who are using this equipment have read this manual.
The operator is responsible for inspecting the equipment and for repairing and replacing
damaged or worn parts to prevent damage or excessive wear to other parts. It is also the
operator’s responsibility to deliver the machine for service or to replace defective parts
which are covered by the standard warranty.
Lack of attention to safety can result in reduction of efficiency, accident, personal injury, or death. Watch for
safety hazards and correct deficiencies promptly. Use the following safety precautions as a guide when using
the machine.
Read the Owner’s Manual. Failure to read the manual is considered a misuse of the equipment.
Use the BP2 sprayer ONLY for its intended use as described in this manual.
Do not allow a child to operate the BP2 sprayer. Do not allow adults to operate the sprayer without
proper instruction.
Use extra care when spraying on stairs. Do not place sprayer on stairs.
Do not use without liquid bottle in place.
Always empty liquid bottle after use and before transporting the sprayer.
Store sprayer in a dry place. Do not expose to freezing temperatures.
CAUTION: SHOCK HAZARD
The BP2 sprayer has been engineered to be very safe during normal operation. However, as with all
line-powered electrical equipment and tools, certain safety procedures need to be followed;
Use a GFCI (Ground Fault Circuit Interrupter) power outlet whenever possible.
Always unplug by grasping the plug. Do not unplug by pulling on the chord.
Never pull plug with wet hands.
SAFE OPERATION OF THE BP2 SPRAYER_ _______________________________
Operator Responsibility and Safety
2
