GPR4 Concrete Scanner – User Manual
D-000002-000021
Earth Science Systems, LLC
February 29, 2019
Copyright © 2019 ESS, LLC. All rights reserved.
Page 17 of 28
into dialog field, click on the field to place the cursor, then press the
icon on the
taskbar to bring up the keyboard.
a.
Grid type
Select either
Single line
,
Parallel lines
, or
2D grid
(cross hatch). When
conducting pavement surveys, select either
Single line
or
Parallel lines
depending in the width of the area to be scanned.
b.
Line directions
Select either
Same direction
or
Alternating
.
c.
Lines in X-axis direction
These parameters specify the beginning and ending
coordinates of the lines in the X-direction, and also the distance between them.
d.
Lines in Y-axis direction
These parameters specify the beginning and ending
coordinates of the lines in the Y-direction, and also the distance between them.
Because lines in the Y-direction are not used for pavement scanning, these fields
can be ignored.
e.
Saving the configuration
The
New, Open, Save,
and
Delete
buttons can be used
to save/recall the dialog settings to/from a named configuration. This is useful
when conducting a series of jobs with a similar layout.
