Pagina
24
HI-PRO 280
Other music sources
A: Aux
B: Ground
Disconnect Hi-pro from the mains.
Unhook the right side of the lid and turn it down.
Connect music source in its connector (E in figure page 13) as shown in
previous figure.
Replace the right side of the lid and connect the mains.
Note: for activation, please refer to the programming paragraph
“External music source”.
Amplifier
Hi-Pro can be connected to an external amplifier, to be used as a pager. The
amplifier must be provided with an AUX input with volume control.
Disconnect Hi-pro from the mains.
Unhook the right side of the lid and turn it down.
Using an appropriate shielded cable, connect amplifier input to AMPL
connector on the terminal. The connection has no polarity.
Replace the right side of the lid and connect the mains.
Note: for activation, please refer to the programming paragraph
“Amplifier”.