Programmings to be performed during installation phase
Pagina
41
PROGRAMMINGS TO BE PERFORMED
DURING INSTALLATION PHASE
S
ETTING A DEFAULT CONFIGURATION
A default configuration is given by a set of programmings through which it is
possible to establish the basic operation of the system.
Hi-Pro has seven default configurations, which can be recalled by a single
programming code:
•
DEFAULT: factory configuration;
•
HOME: for Hi-Pro home installation;
•
HOME /OFFICE: for Hi-Pro home/office installation;
•
OFFICE: for Hi-Pro office installation.
•
OFFICE with DEDICATED FAX LINE: for Hi-Pro office installation;
•
OFFICE with DEDICATED GSM LINE: for Hi-Pro office installation;
•
OFFICE with DEDICATED GSM and FAX LINE: for Hi-Pro office
installation (only for 4 lines equipped Hi-Pro).
Each configuration can be modified or customised
at any time using programming codes.
Default
DEFAULT configuration provides for:
-
under any profile, all telephones will ring in event of incoming call;
-
premium rate call barring (e.g. 144-166-899);
-
time bands inactive;
-
call forwarding towards a number to be programmed is enabled for
doorphone calls;
-
call forwarding towards a number to be programmed is enabled for
incoming external calls;
Home
HOME configuration provides for:
-
the automatic engagement of the external line for all extensions (it is not
necessary to dial 0);
-
premium rate call barring (e.g. 144-166-899);
-
time bands inactive;