PROGRAMMINGS
Pagina
51
A
CCESS TO PROGRAMMING
Enabling programming
Allows you to access the Hi-Pro programming mode.
...
( installer password) (confirm)
Pick up the handset of the system administrator extension (401).
Dial the code 2921.
Dial the installer password (max. 5 digits).
Wait for the confirmation tone and hang up.
Note: the default system administrator extension is the first
extension.
Note: the factory installer password is 12345.
Note: this code allows you to access all password-protected
programmings (beginning with 2). In order to exit
programming, you must dial the relevant code.
Note: date/time, profile recall, storing a number in the phonebook
are not password-protected.
ATTENTION
If a wrong password is inserted for 5 consecutive
times, the access to programming will be inhibited
for an hour.
Disabling programming
Allows you to exit the Hi-Pro programming mode.
(confirm)
Pick up the handset of the system administrator extension (401).
Dial the code 2920.
Wait for the confirmation tone and hang up.
Note: in any case, programming mode will be disabled within 30
minutes from the enabling.