Pagina
64
PROGRAMMINGS
1
BRI T01
2
BRI T02
Dial:
0 Point-to-point
1 Point-to-multipoint
Wait for the confirmation tone and replace the handset.
TEI programming
You can assign a TEI value to each BRI. In the ISDN protocol the TEI value
can be set manually (values from 00 to 63) or automatically assigned by the
exchange to the terminal (values from 64 to 127).
(BRI)
(TEI) (confirm)
Pick up the handset of the system administrator extension (401).
Dial the code 2706.
Dial:
1
BRI T01
2
BRI T02
Dial the TEI value (00-63 for manual and 64 for automatic mode).
Wait for the confirmation tone and replace the handset.
Note: the default TEI value is 00 for each BRI.
Note: for the automatic mode you must program the value 64.
BRI Numbers programming
Allows defining a table of the telephone numbers given by the carrier for each
BRI.
(BRI)
(location 1~8)
...
(number)
(confirm)
Pick up the handset of the system administrator extension (401).
Dial the code 2711.
Dial:
1
BRI T01
2
BRI T02
Dial the location in the table (from 1 to 8).
