Pagina
84
PROGRAMMINGS
Pick up the handset of the system administrator extension (401).
Dial the code 239.
Dial line number (01~04).
Dial the two (or three) digits indicating the extension number to be
programmed as FAX.
Wait for the confirmation tone and hang up.
Note: to avoid the selection of “0” (line engagement digit) from
FAX extension, see “Automatic Engagement” service in
paragraph “Enable Services”.
ISDN Lines
It allows you to set, for each BRI, the extension where the calls recognized by
the FAX-switch are presented.
DEFAULT: 408 for both BRIs.
(BRI)
(extension) (confirm)
Pick up the handset of the system administrator extension (401).
Dial the code 2707.
Dial:
1
BRI T01
2
BRI T02
Dial the two (or three) digits indicating the extension number to be
programmed as FAX.
Wait for the confirmation tone and hang up.
Note: to avoid the selection of “0” (line engagement digit) from
FAX extension, see “Automatic Engagement” service in
paragraph “Enable Services”
FAX-switch activation
Allows enabling automatic fax recognition over each external line.
Analogue lines
DEFAULT:
- Home/Office configuration: recognition enabled over L02~L04;
- Office configuration: recognition enabled over all the lines;
- all other configurations: recognition enabled over all lines.