Essence Smartcare Care@Home MDsense, Getting Started

RESET 
Button

Control Panel

Press RESET. The control panel 

responds with a voice message

14

Multi-dimensional fall sensor

Care@Home

™

MDsense

Getting Started

smartcare

11

Pull the strip down. Press the 

MDsense against the wall

Walk in front of the MDsense. The 

LED flashes quickly

Lie on the floor. Remain still while 

the LED is solid red. Stand up 

when the LED flashes slowly

13

12

Place the MDsense near a corner 

with the strip touching the wall

9

10

Slide the MDsense into the corner. 

The glue sticks

Installing and Testing the MDsense

Using an advanced fall detection 
algorithm with state-of-the-art 
technology, this wireless fall sensor does 
not require the resident to wear any 
detection device. When integrated with 
Care@Home™, the MDsense can detect 
a resident’s fall regardless of whether the 
room is brightly lit or completely dark. 
The MDsense is the perfect fall sensor 
for any home or retirement facility.

Legal notice: 

http://www.essence-grp.com/html/concerning_documents.html

© 2020 All rights reserved to Essence SmartCare Ltd.

www.essencesmartcare.com  •  info@essence-grp.com

ESUG0

5202 Re

v. 1

.0