12
Quick Setup Guide
If your WeR@Home™ Kit includes the Remote Control device, perform the
following procedure to power up and register the device.
1.
Press any of the Remote Control keys five (5) times to discharge the
device’s circuit.
2.
Remove the cover of the battery compartment by inserting a coin into the
slot and turning the cover counter-clockwise until the two small bumps
align.
Figure 2.
Select User for Remote Control
Figure 1.
Add Device for Remote Control Device
5
Register the Remote Control (Key Fob)
The WeR@Home™ System devices in the WeR@Home™
Kit are pre-configured for the Hub, with the exception of
the Remote Control which must be assigned to a specific
User.
NOTE:
The Remote Control must be assigned to a specific
user that has already been defined in the WeR@Home™ System
through the Web Application.
4
Summary of Contents for WeR@Home
Page 1: ...Quick Setup Guide...