background image

Please note: terminal block not included. Installation may require advice from a qualified person. Having correctly 
identified the wiring from your existing light fitting, connect to the approved outdoor rated terminal block in the 
following way:

Instruction leaflet

Decca Spike Kit

1979X

•  We recommend cleaning with a soft dry cloth.
•  Do not use solvents or abrasive cleaners as these 

could damage the finish.

Care & Cleaning

Waste electrical products should not be disposed of with household waste. Please recycle where facilities 
exist. Check with your Local Authority or retailer for recycling advice.

Recycling advice

•  Live Voltages may be present in the driver even when 

turned off or when completely disconnected.

•  For your safety, always switch off the supply before 

maintaining the system. 

•  This system contains non-replaceable parts and 

cannot be serviced. If damage occurs the part should 
be scrapped.

Safety information

Plug Fitting

1. The appliance must be connected to a 240 volts AC 

supply.

2. The appliance can be fitted to a rewireable 3 pin plug 

fitted with a 3 amp fuse. Should the fuse require 
replacement, it must be replaced with a fuse rated at 
3 amp and approved to BS1362.

3. If the mains plug is unsuitable for the socket outlet 

or is removed for any other reason, then the cut off 
plug should be disposed of safely to prevent the 
hazard of electric shock.

4. There is a danger of electric shock if the cut off plug 

is inserted into any 13 amp socket outlet.

10/01/2018

Wiring to approved outdoor terminal block

Reviews: