installation
installation
V.2.0
V.2.0
36
37
Turning the doors around
Unplug the appliance from the mains before
you start changing the doors around.
This refrigerator can be opened from the left side or the right side. By default, it opens from
the right side. If you want the door to open from the left side, please follow the instructions
below.
Tools required: Phillips head screwdriver / Flat screwdriver / Hex wrench
•
If you want to reverse the opening direction of the door, we advise you to contact a
qualified technician. You should only attempt to switch the opening direction of the door
if you feel you are capable of doing so.
•
Ensure that the appliance is empty.
•
Position the two adjustment feet at maximum height.
•
To remove the door, the appliance needs to be tilted backwards. You need to reposition
the appliance on a solid support to ensure it does not slip while the work is being done.
•
All of the removed parts must be kept aside in order to be able to reattach the door.
•
The refrigerator must not be tilted more than 45°.
•
Do not lay the appliance flat as this could damage the cooling system.
•
The appliance needs to be placed against something solid, for example a chair, just
below the upper panel.
•
We recommend that this manoeuvre is performed by two people.
Firstly:
remove the refrigerator door and the freezer door.
a. Using a tool, remove the bolt from the hinge.
b. Using a tool, remove the four bolts from the hinge.
c. Using a tool, remove the four bolts from the hinge.
d. Lift the refrigerator door by 50 mm and remove it.
e. Using a tool, remove the three bolts from the central hinge.
