V.3.0
17
installation of fixed arms
V.3.0
installation of wall plate
7
installation of fi xed arms
installation of fi xed arms
•
Cover a stable, fl at surface with a soft cloth.
•
Place the screen of your appliance on the soft cloth.
•
Locate the threaded mount points on the back of the screen.
Determine the correct screw length by carefully inserting a match or toothpick and
marking the depth of the mount point. Refer also to the operating instructions for your screen.
!
Depending on your screen model and the depth of the mount point, we advise you to use the following
combinations of screw fi xings ( w 1, 2 or 3 spacers):
M4x30 ou M5x30
M4x12 ou M5x12
M4x12 ou M5x12
M6x12 ou M8x16
M6x35 ou M8x40
M4x12 ou M5x12
M4 x 12 metal
screws
or
M5 x 12 metal
screws
M4 x 30 metal
screws
or
M5 x 30 metal
screws
M6 x 12 metal
screws
or
M8 x 16 metal
screws
M6 x 35 metal
screws
or
M8 x 40 metal
screws
or
M8 x 45 metal
screws
M4x30 ou M5x30
M4x12 ou M5x12
M4x12 ou M5x12
M6x12 ou M8x16
M6x35 ou M8x40
M4x12 ou M5x12
M4/M5 washers
M4/M5 washers
No washers
No washers
M8-4 spacers
(if needed)
M8-4 spacers
and/or
M8-8 spacers
and/or
M8-12 spacers
M8-4 spacers
(if needed)
M8-4 spacers
and/or
M8-8 spacers
and/or
M8-12 spacers
Hau
t
Bas
Option
Haut
Bas
Hau
t
Bas
Option
Haut
Bas
Top
Top
Bottom
Bottom
8
V.3.0
installation of fi xed arms
X
TV
TV
TV
Possibilité de superposer
1 à 3 entretoises
•
Before inserting the screws, don’t forget to leave suffi cient space behind your screen to
accommodate the connectors of your multimedia devices (scart cable, HDMI cable..) by
using the different models of spacers.
•
The use of angled or jointed cables is sometimes necessary to avoid damaging the connections
to your screen.
If your screen has a curved back or a recessed mount point, a spacer must be used.
Choose the spacer which is the closest to the depth of the recess in order to hold the bracket as close
to the screen as possible.
Place the spacer between the fi xed arm and the screen. Use the washers provided with the M4-M5
screws for optimal stability.
Attach each arm to the screen, aligning the holes in each arm with the threaded inserts on the back panel
of your screen, inserting the screws through the two holes and turning clockwise using a crosshead
screwdriver until they are completely tight.
It is possible to superimpose
1 to 3 spacers
Summary of Contents for 8000790
