V.3.0
19
maintenance and cleaning
V.3.0
fi nal assembly
9
fi nal assembly
To fi nish installing your new bracket, present the screen to the wall plate. Place the top notch of the fi xed
arms on the back of the screen in the top runner of the wall plate. Then tilt the TV downwards. You should
hear a distinct click, signifying that the TV is in place and fi rmly held.
Haut
Bas
If they are still visible when folded up, cut the
ends with scissors before folding up.
Remember to leave a cord of suffi cient length to allow you to remove the TV from the
bracket later.
When the TV is correctly positioned, you can fold
up the two cords to form a loop.
Cords
Plaque support
10
V.3.0
maintenance and cleaning
Once the TV is in place, it is possible to remove it from its bracket by simply pulling on the two cords at
the end of the mount arms.
By pulling on the cords, the two lower fi xings move aside, releasing the lower part of the TV. Tilt the TV
downwards towards you, then lift it to remove it completely.
maintenance and cleaning
•
Please check that the screws are correctly fi xed every 2 months.
•
If you have the slightest doubt about the installation, contact your professional installer.
All information, designs, drawings and pictures in this document are the property of SOURCING & CREATION. SOURCING & CREATION reserves
all rights to its brands, designs and information. Any copy and reproduction through any means shall be deemed and considered as counterfeiting.
Cords
Plaque support
Summary of Contents for 8000790
