18
V.1.0
V.1.0
19
8
V.1.0
V.1.0
final assembly
9
installation of tilting arms
X
TV
TV
TV
Possibilité de superposer
1 à 3 entretoises
•
Before inserting the screws, don’t forget to leave sufficient space behind your screen to
accommodate the connectors of your multimedia devices (scart cable, HDMI cable...) by
using the different models of spacers.
•
The use of angled or jointed cables is sometimes necessary to avoid damaging the connections
to your screen.
If your screen has a curved back or a recessed mount point, a spacer must be used.
Choose the spacer which is the closest to the depth of the recess in order to hold the bracket as close
to the screen as possible.
Place the spacer between the fixed arm and the screen. Use the washers provided with the M4-M5
screws for optimal stability.
Attach each arm to the screen, aligning the holes in each arm with the threaded inserts on the back panel
of your screen, inserting the screws through the two holes and turning clockwise using a crosshead
screwdriver until they are completely tight.
final assembly
To finish installing your new bracket, begin by loosening the adjustment knobs on the two tilting arms.
Present the screen to the wall plate. Place the top notch of the fixed arms on the back of the screen in the
top runner of the wall plate. Then tilt the screen downwards. You should hear a distinct click, signifying
that the TV is in place and firmly held.
Haut
Bas
If they are still visible when folded up, cut the ends
with scissors before folding up.
Remember to leave a cord of sufficient length to allow you to remove the TV from the
bracket later.
When the TV is correctly positioned, you can fold
up the two cords to form a loop.
It is possible to superimpose
1 to 3 spacers
Cords
Top
Bottom
