1-2
070714
1.1 Technical Data
1.1.1 Pump
: 0.37 kW centrifugal pump with a maximum flow rate
approximately 80 lpm. and maximum head approximately
18 m water.
1.1.2 Bench top dimensions
: 126 cm long
77 cm wide.
1.1.3 Open channel
: 70 cm long
25 cm wide
17 cm deep.
1.1.4 Measuring tank
: Low flow 10 l, High flow 45 l.
1.1.5 Main storage tank
: 165 l.
1.1.6 Accessory
: Outlet hose with fittings for connection to accessory
1.1.7 Power supply
:
220 V, 1 Ph, 50 Hz.
Other power supply is available on request.
1.2 Optional Equipment
1.2.1 HB 001 Bench leveling screws.
1.2.2 HB 002 Two side level gauges are provided instead of one. The second level gauge measures level in
the channel. Thus flow over a notch experiment can be run without using hook and point gauge.
1.2.3 HB 003 Variable speed pump with a control panel instead of fixed speed pump.
1.2.4 HB 005 Measuring tank stilling baffle
1.2.4 HB 006 Full length storage tank with capacity 250 l instead of short storage tank
1.2.5 HB 007 0.37 kW submersible pump with flow rate over 150 lpm instead of centrifugal pump.
1.2.6 HF 011 Variable area flow meter, up to 75 lpm to facilitate the experiments.
1.2.8 HF 011-120 Variable area flow meter 20-150 lpm.
1.2.9 HP 002 Pressure gauges at pump inlet and discharge for pump pressure vs flow rate curve.
1.2.10 Stainless steel pump can be supplied on request.
