36
Never fill the magazine with nails/brads/staples if the trigger or
safety is pressed to the bottom. The magazine shall only be
loaded once the compressed air hose has been connected.
Never damage the gun housing. The housing is a pressurized
container.
The gun should be transported without the compressed air
connected. The gun should not be carried by the hose and
your fingers should not be on the trigger.
Always use the correct machine connection for the quick
coupling. The pressure must leave the tool as soon as the
compressed air hose is removed.
Never exceed the specified maximum pressure (1 bar = 15
psi). Never use gas, oxygen, or other energy sources in
bottles as compressed air, it may cause an explosion.
10.
Cleaning and maintenance
Regularly check that all nuts, screws and parts are tightened correctly.
Cleaning and lubrication is important. Clean the gun daily and lightly
oil the firing pin channel. Only use acid-free oil that is designed for
compressed air guns.
Never work with a broken gun. Only authorised technicians may repair
the gun.
11.
Optimal use of the tool
In order to avoid unnecessary noise and wear on the tool, the
compressed air gun may only be used at the lowest air pressure
required for the work in question. The gun may only be connected to
compressed air hoses which at a minimum are
approved for the gun’s
maximum pr10%. You should use a water separator,
lubricator and reducing valve with each gun. If you do not have an oil
tank connected for air lubrication you should lubricate with a few drops
of acid-free compressed air oil directly in the gun's air nipple, about 4-
5 drops per 500 shots.
Summary of Contents for 7317761049708
Page 1: ......
