Equipment Enclosures Manual
1
CAB-2, CAB-3/CAB-3F, CAB-6F Equipment Enclosures
Description
The CAB-2 and 3 are surface mounted enclosures. The CAB 3F and 6F
are semi-flush mounted enclosures. All are for the installation of control
hardware. All cabinets are UL listed, constructed of 16 gauge welded
steel, and feature mounting rails with speed nuts for mounting modules.
The surface mounted enclosures feature a removable door which is
hinged on the left side. The doors on the semi-flush mounted
enclosures are integral to the finished frame. All doors are provided
with a Lexan insert for viewing system indicators and are secured with
a standard key lock assembly.
All enclosures feature mounting studs for mounting a door tamper
switch, which is required for security panel operations. Door
assemblies and back boxes are painted white. Red enclosures may be
specified by adding an “R” suffix to part and model numbers.
Electrical knockouts are provided on the top, bottom, and sides of the
back box, and keyhole mounting slots are located on the back. The
removable backplane permits mounting and wiring of control panel
components out of the back box for bench testing and facilitates easy
installation. Space for batteries is provided at the bottom of the
enclosure.
Application
The CAB-2, 3, 3F, and 6F enclosures are designed for installing
equipment in surface or semi-flush enclosures.
Note:
Do not install conduit in bottom of enclosure.
firealarmresources.com
