Product identification
6
DDE 1500
60000-52-03
2.2 Intended application
2.2.2 Intended use
The product has been manufactured based on state-of-the-art technology and
according to recognized safety regulations and must be used as intended:
For permanent connection to a Lissmac processing machine
Only functional as a dust extractor in conjunction with an appropriate filter
unit from the DDE 1500 series.
As a fan unit for a modular dust extraction concept.
For commercial use, such as in industrial enterprises and workshops.
For extraction in individual workplaces.
Only for dry cleaning.
As a central extraction system on dust-generating machinery.
As a central extraction system on chip-generating machinery.
As a central extraction system on machines which produce swarf and chips.
Other applications are considered unintended use. LISSMAC is not liable for
damages due to unintended use!
2.2.3 Improper use
The product has been manufactured according to the state of the art and
recognized safety regulations. Unintended use may cause hazards.
Therefore:
Do not
operate without an appropriate filter unit from the DDE 1500 series.
Do not
use or store outdoors or in wet conditions.
Do not
change the location of the product during suction operation.
Do not
set up or operate in dust/gas-explosive areas.
Do not
use in painting operations.
Do not
use for the extraction of aluminium or highly alloyed steel dust.
Do not
connect to processing machines that may produce active ignition
sparks or hot embers.
Do not
suck up liquids.
Do not
suck up aggressive gases.
Do not
suck up any readily flammable or glowing particles.
2.2.4 Reasonably foreseeable misuse
Do not
suck up hot embers, such as cigarette butts.
Do not
cause complete closure of the suction openings.
