Copyright 2013 EStar America, LLC
Page 3 of 9
Using the ESG601 3D Glasses
Battery Charging
To charge the ESG601, use the included USB-Power
cable with the custom connector. The custom
connector of the cable attaches to the DC connector on
the top of the left earpiece of the glasses (see photo to
the right). The red LED will turn on while the battery is
being charged. When the battery is fully charged, the
red LED will turn off. The other end of the cable may be
attached to any USB A-type port, such as a port on a USB hub, a computer, or the back of a TV. If
attached to a computer, the ESG601 will use the computer only to receive power; the glasses will not
appear as a device visible to Windows, Mac or other operating systems. The USB cable may also be
attached to a USB charger or a phone charger with an identical connector. The ESG601 battery is
designed to operate up to 60 hours on a full charge, and can be recharged completely in less than two
hours.
Power Button and LED Indicator Function
The inside left earpiece of the frames contains both the Power button and the red/blue LED Indicator
Light.
