Estate Swing E-SC 1600 / E-SC 1602 Column Mounted Gate Opener Instructions.
4. Assemble the articulated arm and front coupling as shown below. Do not over tighten the lock nuts, the arms
should be able to pivot without resistance.
Left Hand Assembly
Right
Hand Assembly
5. Attach the straight arm on the motor drive shaft spline and secure it in place
6. Manually release the operator and swing the arm assembly so the gate bracket
is on the gate in the closed position. The arm should be almost straight with a
slight bend in the elbow of the arm assembly.
7. Ensure the arm is level and attach the gate bracket using the 5/16 bolts.
Once the bolts are attached the remainder can be cut off.
8. Relock the operator and assemble the motor housing.
8
