Estate Swing E-SC 1600 / E-SC 1602 Column Mounted Gate Opener Instructions.
Too
ls N
ee
ded
Other items that may be needed prior to commencing installation.
Start and stop post, bracket or door stop. Although the Estate Swing E-SC 1600 features soft start/stop and
uses limit switches, it is still best to have the gate(s) close against positive stops.
16, 14 or 12 gauge, 2 conductor stranded direct burial low voltage wire will be required to run power
to your operator.
Length is deter mined by distance between transfor mer power supply and the control
box.
A voltage meter and digital camera may be necessary to run diagnostic checks.
Hardware to attach control box to fence or column.
If your transformer is going to be plugged into an outdoor outlet you will need to weatherproof that outlet
and transformer.
Electrical boxes or plug covers
can be obtained from a local hardware store to
accommodate both the plug and transformer.
Protect all ingoing and outgoing wires with a surge suppressor. Consult your local dealer for more
information.
4
Power Drill and
appropriately sized bits.
Crescent Wrench
Flat Head Screwdriver
Nuts, Bolts, Anchors and
Washers (see below)
C-Ring Pliers
Phillips Head Screwdriver
Tape Measure
Level
Wire Strippers
C-clamps
Carpenters Clamps
