background image

6.

All equipment, which is sold under Estella trademark and used for commercial 

purpose is warranted against defects in materials and workmanship . The warranty 

runs for six months from the date of purchase and is for the benefit of the original 

purchaser only . All other Warranties, Expressed or Implied, Statutory or Otherwise, 

including Without Limitation any implied Warranty of Merchantability or Fitness for 

Purposes are excluded . The Seller shall in no event be liable for direct, indirect, or 

consequential damages in connection with Estella commercial products .

This warranty is not effective if damage occurs because of accident, carelessness, 

improper installation, lack of proper set–up, supervision when required, or if the 

equipment is installed or operated in any manner contrary to the installation and 

operating instructions . Work performed by unauthorized personnel or unauthorized 

service agencies voids this Warranty .

This warranty does not apply to, and Estella is not responsible for, any warranty 

claims made on products sold or used outside of the United States .  Residential use 

voids the warranty .

LIMITED WARRANTY

Summary of Contents for 348EDS12D










Reviews: