•
A fire or explosion hazard is possible when spraying flammable materials. To
assure safe operation of your spray machine, read the following instructions
carefully:
o
Always spray in a well-ventilated area.
o
Always keep the turbine system of the High Volume Low Pressure (HVLP)
Spray Tan Machine at a maximum length of hose.
o
Store the machine indoors. Never allow the machine to freeze.
o
Never alter or modify any part of this machine. Otherwise, it may cause
malfunction and injury.
o
Never attempt to clean any part of the machine while it is plugged in.
o
To reduce the risk of electric shock, do not expose to water.
o
Before using the machine, install the filter on the bottom of the machine.
o
Do not cover the air inlet of the machine except with the filter.
o
Do not close the airflow with spray gun, it should have air flowing out all
the time. If not, the motor will overheat, or the machine may burn out.
o
Do not use the machine continuously for more than 15 minutes protect
the motor of the machine.
o
The machine’s motor has overheat protector, when it is overheating, the
motor will shut down. It normally takes 30 minutes to return to normal
working temperature. When the temperature is normal, the motor will
resume operation.
o
The turbine system air outlet and hose may become hot during use. Do
not allow the hose to flatten where it is hot near the air outlet.
•
Never leave machine unattended. Keep away from children or any person not
familiar with the spray machine.
•
Tanning solution can discolour light coloured hair and fabrics. Cover anything that
could be affected.
•
Do not use any adapters with this product.
•
Use only a three-wire extension cord with a 3-slot receptacle like the plug on the
machine. Make sure your extension cord is in good condition. When using an
extension cord, be sure to select the cord that can support required current supply
to the machine.
•
An undersized extension cord will cause a drop in the line voltage resulting in loss
of power and overheating. If in doubt use the next heavier gauge. The smaller the
gauge number, the heavier the wire thickness. Please use the chart below as a
guide to selecting the proper size extension cord.
•
To replace parts contact Kogan.com
SAFETY & WARNINGS