Operation manual for M RS 420 ESTYMA control unit
9
ACCESSORIES
ADDITIONAL CONTROL PANEL
The controller may be equipped with an additional control panel – the Pellets
control 420. The panel may be installed in another location, e.g. in a flat, for
remote control of the system. For additional information, please contact estyma
electronics – see the contact details on the last page of this manual.
ROOM TEMPEATURE REGULATOR
The M RS ESTYMA controller can work with any temperature room regulator with
closing contacts.
The room regulator should be installed in a
location which is representative in terms of
the temperature in the flat, at a height of
1.5 – 2m.
Do not install the regulator near heat
sources (e.g. TV set, radiators), in places
exposed to direct solar radiation or
draughts, as it will adversely affect the
performance of the system.
Figure: Connection of a room regulator
