1.4 Safety precautions
Warning – risk of electric shock!
•
Read this operation manual carefully and thoroughly before using the unit.
•
Keep this operation manual and refer to it whenever you work with this unit in the future.
•
Apply all the rules and heed all the warnings included in the unit operation manual.
•
Make sure that the unit is not damaged. In case of any doubts, do not use the unit and contact the
supplier.
•
In case of any doubts concerning the safe operation of the unit, contact the supplier.
•
Pay special attention to all warning signs on the unit casing and its package.
•
Use the unit as intended.
•
The unit is not a toy. Do not allow children to play with it.
•
Under no circumstances children should be allowed to play with any parts of the package of the unit.
•
Access to small parts such as clamping screws or bolts should be secured againstchildren. Such
elements may be delivered with the unit and may result in choking when swallowed by a child.
•
Do not make any mechanical or electrical changes to the unit. Such changes may cause the unit to
malfunction and fail to meet the relevant standards, leading to an adverse impact on the performance
of the unit.
•
Do not insert any objects into the unit through openings (e.g. ventilation grills), as this may cause
short circuiting, electric shock, fire or damage to the unit.
•
Do not allow water, humidity or dust to enter the unit, as this may cause short circuiting, electric
shock, fire or damage to the unit.
•
Provide adequate ventilation of the unit, do not cover or block the ventilation grills, and ensure that
there is free flow of air around the unit.
•
The unit should be installed indoors unless it is adapted for outdoor operation.
•
Do not expose the unit to mechanical impacts and vibrations.
•
When connecting the unit to power supply, make sure that the parameters of the supply network are
within the unit’s operating range.
•
All electrical connections must be as shown in the electrical assembly drawings and must comply with
national and/or local regulations concerning electrical connections.
•
This unit contains no parts that may be replaced by the user. All maintenance work except for
cleaning, fuse replacement (when the unit is de-energized), and function setting, should be
performed by an authorized service provider.
•
Before doing any maintenance work, you must cut off the power supply to the unit.
•
Do not clean the casing of the unit with petrol, solvents or any other chemicals that may damage the
casing of the unit. Using a soft cloth is recommended.
estyma electronics
www.estyma.pl
page 5
EN20141219
Summary of Contents for VIDENET
Page 1: ...Internet module VIDENET ...
Page 2: ...page 2 EN20141219 ...
