6
6
Attention:
(1)Keep Esway horizontal and power on it, press pedal switch, you can drive Esway without
remote control.
(2)Default mode is Normal Mode (12KM speed limited, turning sensitive is mid).
(3)All the functions of remote control button are only valid when nobody on Esway.
2.Function of Sound Alarm
(1)One beep sound: Confirming reception of remote control
(2)Fast and short sound: It detects no driver on or the driver left.
(3)Continuous sound: Over speed situation, system limits the speed.
(4)Continuous five sounds: system locked (or problem from pedal switch).
Chapter IV Getting Started
1. The Right Starting Operation
Hold the turning pipe/handle bar with one hand, keeping the pedal upright ,turn on the
power, after green light, orange light and red light flash at the same time, and the green light
stay on continuous, it means starting success (refer to picture 3,4,5). Then hold the handlebar
firmly with two hands (refer to picture 6).
Make sure the pedal is on horizontal level when power on, because Esway cannot power on
if it is not on horizontal level.
Picture 3
Picture 4
