6
1. Press power key on the remote to turn ON;
2. Press power key and lock key together, the wifi symbol will flash;
3. During the flashing, turn ON the power switcher on the chariot;
4. Then connected ESWING and the remote.
Chapter III
Ｉｎｓｔｒｕｃｔｉｏｎ ｍａｎｕａｌ ｏｆ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ
Ｉｎｓｔａｌｌ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｔｈｅｎ ｔｈｅ ｉｎｓｔｒｕｃｔｉｏｎ ｏｎ ｈｏｗ ｔｏ ｃｏｎｎｅｃｔ
Ｈｏｗ ｔｏ ｃｏｎｎｅｃｔ ｔｈｅ ｒｅｍｏｔｅ ｔｏ ｔｈｅ ｕｎｉｔ
Long pressing on the 3rd key .
Ｈｏｗ ｔｏ ｔｕｒｎ ＯＮ／ＯＦＦ ｔｈｅ ｆｒｏｎｔ＆ｂａｃｋ ｌｉｇｈｔｓ
Ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ
–
ｉｃｏｎｓ ｅｘｐｌａｎａｔｉｏｎｓ
１、Ｂｅｇｉｎｎｅｒ ｍｏｄｅ
Take remote control out,
operate according to picture.1
Put remote control back,
operate according to picture.2
Picture. 1
Picture. 2
ＣＡＵＴＩＯＮ
If the chariot upwards, don’ t lean it forward anymore, the
rider must lean backward firmly to stop immediately;
otherwise the rider will be fall off and hurt himself, even
more serious consequences happened if not in according
with the speed limit.
Please ride carefully to avoid falls. Beginners are
recommended to use beginner mode.
Press key and icon
displays, it means beginner mode
starts, and the speed is limited
within 6KM. You can press key
again to exit the beginner mode.
